Tachometer, temperature gauge, hour meter "keep-racing® III", for 2- and 4-stroke engines

RPM & Temperature Gauge, Hour Meter "keep-racing® III", for 2- and 4-stroke engines
New 2026 Version

HOUR METER ---- Track how long the engine has been running (TOT); Record individual time durations (JOB) and maintenance intervals (SVC1, SVC2) for maintenance purposes so you can be notified in a timely manner; TOT and JOB time range: 0 to 999,999 hours, SVC1 and SVC2 time range: 0 to 250 hours.

RPM METER – Displays real-time RPM through various engine ignition patterns for 2- and 4-stroke engines to adjust the engine’s idle speed; alarm channel for RPM limit reminder; display of the highest RPM since engine start; RPM measurement range: 0–25,000 RPM, alarm range: 0–25,000 RPM.

TEMPERATURE GAUGE ---- Keep track of the current and maximum engine temperature at all times with a sensor; reminder for engine maintenance when temperature is exceeded; easy switching between Celsius and Fahrenheit; temperature measurement and alarm range: -20 °C to +300 °C (-4 °F to +572 °F)

BACKLIGHT ---- The green backlight makes it easier to use at night or in dark places. You can set the backlight to “always on,” “off,” or “auto” as needed.

OTHER FEATURES --- - Easy installation by sticking it to any suitable location; single-cable connection design for engine signal detection with a shortened or extended cable (cable length: approx. 68.8 inches); 2 operating modes for different usage habits; Good water resistance thanks to the overall housing design and the rear O-ring; user data is retained after turning off the display or changing the battery

Technical Details:

• Memory function for maximum RPM (0 to 25,000 RPM)
• Temperature (-20 to 300 degrees Celsius, or -4 to 572 degrees Fahrenheit)
• Operating hours display (0 to 999,999 hours)
• Battery and cable included
• Replaceable battery (button cell) (provides continuous power to the DZM)
• English user manual
• Refresh rate: 0.5 sec.
• Dust/water protection level: IP65
• Connection to an external battery possible/recommended (10–30 volts)
• The RPM cable is connected between the DZM and the engine’s ignition cable using the included cable (wrapped around the ignition cable)
• For karts, racing motorcycles, quads, pocket bikes, boat engines, chainsaws, and other applications where internal combustion engines are used

Dimensions: (LxWxH in mm) 79x41x21.6

Included in delivery:

Tachometer, incl. battery
cable, RPM
cable, temperature cable with M10 x 1mm
sensor, external
power supply cable, cable ties
, mounting tape (adhesive tape, Velcro)
, user manual (English)